Giant-nano material technology Co., Ltd.

搜尋

Giant-nano material technology Co., Ltd.

High wear-resistant anti-fog coating

Description

Traditional plastic substrate has poor hardness, and its surface is easily scratched. Coating with a scratch-resistant hard-coating can successfully increase the surface hardness of the plastic.
Water contact angle of traditional plastic is over 50°, which fog could easily condense on the plastic surface. Super-hydrophilic surface coated plastic substrate has characteristics of low water contact , easy-to-dew condensation on the surface, and anti-fog effect.
Another super-hydrophilic coated plastic substrate has a non-sticky effect. The surface which placed in outdoor could get dirt easily and affect by rain erosion. After observation, the surface with coating hydrophilic film material is clearer than the original plastic.

Feature

  1. High hydrophilicity
  2. Anti-fog
  3. PMMA based
  4. IPA solvent based, non-poisonous
  5. RoHS, REACH certification
  6. UV curing

Specification

Item ISC Tesr method
Viscosity (cp) 8 ±0.8 A&D SV-10
Specific gravity 0.9±0.03 hydrometer
Solid content(%) 13±2 crucible
Solvent EAC  

Process condition

Item ISC Note
Solution temperature(°C) R.T Under dark or yellow light environment
5um,3um,1um filter
Coating method Roller Dry film thickness = 3~5 um
Coating environment-temperature (°C) R.T  
Curing temperature (°C) 80°C 1min  
UV curing 500~750 mj/cm2 365nm UV light 

Performance

Item ISC Test method reference
appearence transparent visual  
adhesion 5B 3M scotch 600 tape ASTM3359
Water contact angle <5° Goniometer  
(On PC) pencil hardness H 500g ASTM3363
(On PET film) pencil hardness 2H 500g ASTM3363
Anti-fog test no fog at all 80°C water,5cm,15 mins
60°C water,5cm,15 mins
 

Reliability test

Item Anti-fog result
25°C water for 1 hour (on PC, PET film) Clear surface, excellent anti-fog
25°C water for 25 hours (on PC, PET film) Clear surface, excellent anti-fog
Boiling water at 100°C for 1 hour (on PC, PET film) Clear surface, excellent anti-fog
20% NaCI 90°C for 5 minutes (PC, PET film) Clear surface, excellent anti-fog
Sonication in water 3 minutes, 3 cycles (on CR-39, PC) Clear surface, excellent anti-fog
500 hours of headlight exposure (on PC) Clear surface, excellent anti-fog